We at Mansfield based Drive-Cote Ltd have been operating for nearly 18 years and during this time we have seen companies come and go.  A resin stone option for your driveway, path or patio can be open to all sorts of variations of suitability from different companies.

We would like to say we can offer a 20 year guarantee but we can’t and don’t profess to. The questions to ask is to what extent is the guarantee offered – have they been trading 20 years? Will they be trading in 20 years?  Does it cover the materials only or the install as well (perhaps these questions should be applied to any sort of extensive guarantee)?  We at Drive-Cote Ltd are a small personable local company offering a resin stone option, we do not sub contract and we do not employ the services of other Companies.  Our suppliers are long standing and reputable supplying to the trade with a durable and commercial product available to us for residential use.  This in itself can provide confidence in longevity and durability for a resin stone option for a driveway path or patio from Drive-Cote Ltd.

Resin stone options for driveway paths and patios vary in requirements from the client specification to the suitability of the product for the surface and/ or purpose.

A resin stone option can be split into 2 main sections really

Resin bonded

Resin bound

Wording can be used to describe the different installs.  So on the plus side resin stone options using the bonded application are lot less expensive (or perhaps the word cheap can be used if trying to sway the reader towards the other resin stone option – resin bound stone).

So on the plus side for a resin stone option using the bound application Suds compliant can be highlighted.  However Suds compliance does not mean it has to be permeable it means the run off water has to be managed and that can be with an aco drain and once again perhaps selective wording can be used to sway the customer.

Resin stone option choice

should be down to the suitability of the surface and the requirement of the client.

If we were to look at one example of a requirement for a client  i.e. low or virtually no maintenance then resin bonded stone would be a better choice.  Impermeable means a stiff brush and occasional jet wash is all that is required.  No seal required,  no debris and dirt to clear as can be the case with a permeable surface.  If water can get through then so can mud and debris and this will affect the efficacy of the permeability.

Remember concrete, tarmac or imprinted concrete resin bonded stone can resurface without any mess or disruption

We offer free advice with no obligation – so feel free to call Drive-Cote Ltd based in Mansfield covering Shirebrook, Stonebroom, Clowne, Sutton in Ashfield, Kirkby in Ashfield, Belper, Forest Town, Clipstone, Teversal, Rainworth, Stanton Hill, Tibshelf, Morton, Pilsley, Edingley, Southwell, Mansfield Woodhouse.

The post resin stone option choices information Drive-Cote Ltd appeared first on Drive Cote.

For a fresh new and extended driveway resin bonded stone can provide  uniformity and a durable quality to an otherwise limiting access.  This Mansfield client wanted to extend and incorporate more hard standing area so we completed this Mansfield driveway resin refurbishment.  We could say completed in a day but that would be untrue as we had to extend the area first.

Works needed first to enable a uniform coverage included groundworks and preparation works to facilitate the concrete install prior to the resin install (which was completed in a day)

     The end product being a protective durable and anti slip surface.  Virtually maintenance free!

Resin driveway by Drive-Cote Ltd

Mansfield driveway resin resurfacing Mansfield

Drive-Cote Ltd resin bonded stone path

Resin paving completed in a day

The post Mansfield driveway resin refurbishment completed by Drive-Cote Ltd appeared first on Drive Cote.

a resin bonded USP for your concrete or patio would have to be the fact that it uses an existing surface as a base.

Not all resin resurfacing is bonded and therefore does not provide the benefit of the USP on using an existing surface.  This week we have been provided with a number of enquiries all needing clarification as to the difference between resin bonded and resin bound surfacing and paving options.

We are Mansfield based and have been working with resin for nearly 2 decades and even to this day we still have to clarify the differences in resin, its purposes and uses and the benefits.

We have even recently seen a resurfacing with resin on a block paved drive which is not a something we advocate. Resin is a solid monolithic surface the same as concrete and tarmac and installing resin bonded stone on an impermeable surface means it reinforces the stability and strength of the resin.  The USP being it uses existing surfaces.  Don’t take our word for it.  Call for an example near you.

Mansfield Ashfield Sutton Chesterfield Higham Alfreton Shirland Westhouse Stonebroom Morton Pilsey Tibshelf Stanton Hill Shirebrook

Commercial or residential we can help.

The post resin bonded USP appeared first on Drive Cote.

As the start of the season begins we thought we would  remind everyone of the possible driveway surface solutions available.  Obviously when we say driveway we include paths and patios in this subject.

• Resin Bonded Stone
• Resin Bound Paving
• Block paving
• Imprinted concrete
• Tarmac
• Concrete

No one surface is the ideal, especially if the subject matter is external.  Whilst we in the UK are not subject to severe weather conditions as a whole, we still need to be respectful of elements which can create the need for possible driveway surface solutions.

The freeze thaw effect which has not had much effect this year, is the main cause of surface deterioration with tarmac and concrete.  Potholes and shelling being obvious evidence of the how the weather can damage our driveways paths and patios.  That said the surface damage is generally superficial and if treated or protected soon enough further deterioration will not occur.

Resin bonded stone and resin bound paving very often confused as the same ( which they are definitely not), block paving, imprinted concrete, tarmac and concrete are all possible options but it should be realised there is a downside to all  external surfacing.  It may be a maintenance option is necessary (block paving and imprinted concrete for example).  We always recommend all possible driveway surface solutions are considered carefully.  Consider why you need to address the area, or if it is just a cosmetic solution you required.

[See image gallery at www.drive-cote.co.uk] We try to provide the pro’s and cons with all our clients.  As a Mansfield based company we aim to offer honest advice.  For example consider what is already down and the purpose for what you are considering possible driveway surface solutions for – is it to protect? Is it to look attractive?  Is it a necessary finish?  Do you want a choice of colour?

Remember you do not have to resurface in in one go your driveway path or patio area can be an organic development and can even create kerb appeal.

Mansfield, Ripley, Heanor, Belper, Shirebook, Warsop, Blidworth, Bilsthorpe call now for a free quote.

The post possible driveway surface solutions ask Drive-Cote Ltd appeared first on Drive Cote.

Drive-Cote Ltd resin bonded website revamp is on the cards for our Drive-Cote Ltd company

We have been installing for over 15 years now with quite a lot of our history recorded on the website and the thing with websites is that they soon become outdated.

Mobile devices being a popular search tool now like different versions than the standard desktop versions.

The Drive-Cote Ltd resin bonded website revamp will hopefully help reach our audience a little easier.

[See image gallery at www.drive-cote.co.uk] Resin bonded stone was originally used on the roadways but it soon progressed to residential surfaces which is where our start was.  Resin bonded stone being a durable but attractive product means that existing surfaces can be resurfaced.

So keep checking in and see if we have upgraded yet!  Concrete, imprinted concrete or tarmac (path or patio) we can resurface for a virtually weed and maintenance free surface. (don’t forget we can’t do block paving)

Or come and see resin bonded stone in situ!  Here at Drive-Cote Ltd 63 Berry Hill Lane Mansfield Notts NG18 4BP

The post Drive-Cote Ltd resin bonded website revamp appeared first on Drive Cote.

Found this on the internet and I bet resin stone Sydney  doesn’t have the same issues as the UK with the weather holding them to ransom.

On saying that too high a temperature can have a negative on the resin installation as well!

I also found a pour on resin they are using in Sydney.  This website provides a case study for information. 

This is not something we as a company provide however, it would be interesting to see how it wears.  The report goes on to say

“Midland Interchange, WA

In 2012 over 3500m² of Pour On Gravel Binder was used to stablise a decorative gravel finish to a newly developed landscape feature at the busy interchange in Midland, WA.

The post resin stone Sydney appeared first on Drive Cote.

What is or are resin aggregate driveway benefits – where do we start?

Durable

Virtually no maintenance

Anti slip

Cost effective

Can be completed in a day

Attractive

Suds compliance

Virtually weed free surface

Choice of colours and finishes.

Uses the existing surface.

That’s quite a list for resin aggregate driveway benefits.  Whether your existing surfaces are  concrete, tarmac or imprinted concrete and even slabs in some cases, resin bonded stone can be applied.

To elaborate a little on the above benefits – Suds Compliance for eg.  Our clients very often believe that they must have a permeable surface to be Suds Compliant. This is not the case. What the Suds Compliance requirement is, is that “run off water is managed”.  As simple as that.  That could mean the surface area you already  have is Suds Compliant. In addition this only applies to front gardens! Resin aggregate  driveway benefits can enhance, protect and extend the life of your existing surface.

What  a lot of clients do not realise is that that surface they already have may not look very nice but a lot of the time this can be surface damage only.  In the case of concrete it is an extremely versatile product and has been around for years.   Concrete as a base to for weight bearing purposes  is a product that is hard to beat.  So whether you are in Mansfield, Wellow, Ollerton, Ilkeston, Ripley, Stonebroom, Alfreton, Sbirebrook. Derbyshire, Nottinghamshire or  Leicestershire.  Call us for a free no obligation chat.  We can send you some information out, or call out and quote.   Don’t forget your driveway path or patio can enhance your garden.   If you have a block paved edge  no problem one of the resin aggregate driveway benefits is that it does not affect existing levels.

Ring Simon or Faith for honest advice.  So take advantage of  the resin aggregate driveway benefits which can extend the life of your concrete, imprinted concrete tarmac or slabs.  01623 623986.

The post resin aggregate driveway benefits appeared first on Drive Cote.

We recently had a gentleman contact us  (out of our area unfortunately) asking for some advice and a possible quote.

On chatting we established he had tarmac which was a good solid surface (down for some 30 years), and he was looking for a resurfacing option – the question was then  – resin driveway bonded? bound? Which is why he called us to find out.  After chatting c0nfirmed our conversation via email as follows

“To reiterate and to answer your original question – resin driveway bonded? bound?  you should be looking for resin bonded as opposed to resin bound firstly.

Why?

just to confirm a few aspects

Resin bonded is impermeable (therefore is ideal for tarmac and concrete as they are basically impermeable)

Resin bound is permeable and is more suited to foot traffic  and needs a permeable substrate such as compacted hardcore

If a resin bound – permeable surface is applied to an impermeable surface where does the water go?

Resin bonded is applied to a maximum depth of 5-8mm

Resin bound should be  with a depth of at least 18mm

Resin bonded needs virtually no maintenance just a jet wash and stiff brush

Resin bound needs to be regularly treated for moss and weeds

Resin bonded DOES NOT affect existing levels

Resin bound DOES affect existing levels.

Resin bonded is anti slip

Resin bound does have anti slip qualities but nowhere as effective as with  resin bonded

Resin bonded should be in the region of £40 per sqm

Resin bound should be in the region of £70 per sqm.

On to the subject of companies who may help you. A lot of companies market and install resin bound.  However a good resin company should be able to work with both resin bonded and resin bound  and should certainly install the right product for the right surface and purpose.”

We then went on to offer 3 large National Companies  for him to contact and  to see if they could help him

We also suggested

“Another consideration is to look locally, Supermarkets have what they call tree pits (resin bound  permeable areas but still resin) On the highways – contact your local council and they should be able to tell you who the installer is – they may have a residential arm to their business.

Local shopping centre – ask them who they have used.

As I said a good resin company should be able to work with both products and should be able to explain to you why they use the resin bonded (or not as the case may be) and when you raise the points above they should be able to lay your mind at rest.

If you want any further info then don’t hesitate to come back to me. Email is always good as I am in and out a lot.

Let me know how you go on!”

We work with existing concrete, tarmac and imprinted concrete surfaces.  Whether it is a driveway path or patio we can resurface.

Being an independent  company we are not affiliated to any large concern.  Kirton, Southwell, Mansfield, Matlock, Sheffield, Sherwood, Arnold, Bilsthope, Ilkeston, Codnor, all areas we can work within.  It is free to call us now.

The post resin driveway bonded? bound? appeared first on Drive Cote.

We have recently received an enquiry with regard to a resin garden path and the potential.  The client emailed to ask about a resin garden path  and said

“I have older concrete paths in my back garden and wonder if a resin coat would be a cost effective way of bringing them back to life! I appreciate that you may not cover my area but I am looking for a quote or recommendation of someone you may know over this way.  Any help appreciated“

Unfortunately we are too far to quote but we did try and guide him a little where to look and what to look for with regard to a resin garden path- see below.

“Thanks for the email.  Sorry no we don’t cover your area.  We would not be in a position to quote in your area.

 What you need to look for is resin bonded stone as opposed to resin bound stone.  I don’t know if you are aware of the difference ?

If your existing paths are a solid impermeable surface ( which concrete is) then you need a resurfacing product to  that provides a further impermeable surface  a permeable surface and a resin garden path in resin bonded aggregate would provide this.

 Basically if the existing is fine then you just need to protect it further.  The resin bonded stone  is impermeable and anti slip and virtually eliminates weeds (water can’t get down and weeds can’t get a grip).  If you looked at the other option – resin bound paving ( or aggregates as it is also known) , then you need to be aware.

This is permeable and therefore allows the ingress of water.  The other quite important aspect is the depth of the layer of resin. Resin bound is trowelled on and should be applied to a 10 mm + depth which in turn can affect the existing levels.

Resin bonded is spread on and then has the specialist aggregate applied  and will not affect the existing levels.   Back to your question  – can we recommend any one?  The short answer is no.

However what we do say is that there  are National Companies  who train installers, however be aware that these seem to  favour resin bound.  That said, you will find that the installers should be trained in both applications.  So bearing in mind the points above, you can put  these comparisons  to the companies and form your own opinion from there.

The other thing to do is look locally and you will find that resin is in various shopping centres and on the local highways?  I would contact the local shopping centres and ask who completed the works.

Also contact your local highways/ council and you may will find that they will supply you with the details of the local contractors.  They may well do residential and if not they may well know a man who does!

Hope I have been of help. If you have any questions – don’t hesitate to come back to me”

Whether it is a driveway path or patio, if it is concrete or tarmac we can resurface with resin bonded stone. No mess no disruption and just as importantly it can help eliminate weeds, moss  and algae problems   in addition it will provide an anti slip quality.

The post resin garden path request appeared first on Drive Cote.

Local University quote recently completed has necessitated a return visit to check on the necessary works that have been completed by the local builder. We need to do this to ensure that the surface is correct for our Nottingham resin bonded aggregate resurfacing.

The building company have laid a concrete slab and in addition have completed some remedial works for this Nottingham University medical school.  The curing process of the concrete has been completed so they are eager for the resin bonded aggregate resurfacing works to be completed.

We intend to go out this week to establish a completion date for this Nottingham resin bonded aggregate resurfacing. However, as with all of our works,  we are heavily dependent on  “accommodating weather”!

With over 12 years  experience we have the knowledge to ensure that the optimum conditions are utilised.   The installation of  this Nottingham resin bonded aggregate resurfacing works will add an anti slip protective and durable surface.

We recently went to quote a Woodthorpe customer for a Nottingham resin bonded aggregate resurfacing.   He has an extremely steep driveway, in fact it is very difficult to walk up as it is  and the frost has not arrived yet!  This surface is a block paved area, which we cannot resurface.  The steepness of the slope causes such a problem and the fact that the block paved area had sunk has made this client decide to address the problem.  The client is having concrete installed and a split level area established  in order to help  compensate for this slope.

We have provided the client with a cost per sqm as an approximate so that they can gauge an approximate cost for the Nottingham resin bonded aggregate resurfacing.

We have asked this customer to let us know how he goes on, even if he does not decide to resurface with our resin bonded stone.

The post Nottingham resin bonded aggregate resurfacing appeared first on Drive Cote.